| Item Name |
Image |
"Big Red" Monster .28 Mach 2 with Pull/Spin Start by Dynamite(DYN0992)
Specs:
Type: 2-Stroke
Displacement: .28
Bore: 18.5mm
Stroke: 17mm
Total Weight: 390 g
RPM Range: Up to 34,000
HP: 3.4
Front Bearing Size: 7 x 19 x 6
Rear Bearing Size: 13 x 24 x 6
Cylinder Type: ABC
Starting System: Pull/Spin-Start
# of Ports: 5+1
Carb Type: 2-Needle Slide
Crank Type: SG
Price: $149.99 |
Details
|
.55HZ-H Hyper Ring 40L ( OSM15630 )
OSM15630
Displacement: 0.55 cu in (8.93cc)
Bore: 0.91"
(23mm)
Stroke: 0.85"
(23.5mm)
Practical RPM: 2,000-17,000
RPM
Weight: 14.39oz (408g)
Price: $299.00 |
Details
|
121VR .21 Off-Road Competition Nitro Buggy Engine by Associated Electrics, Inc. (ASC800)
Key Features:
3+1 port chrome-plated cylinder
High Silicon CNC Machined Piston
Knife Edged 7075 Aluminum Connecting Rod
Polished turbo scoop crankshaft with silicone insert
Chrome-plated backplate with turbo scoop
Precision ball bearings
Lightweight machined aluminum heat sink head
Oversized finned turbo head button
Thermo-insulated, screw-mounted 2-needle carburetor
7.0mm, 8.0mm and 9.0mm air restrictors
Fits 1:8 scale off-road vehicles
Price: $259.99 |
Details
|
AE 4.6 Engine: MGT SE (ASC25354 )
Features
* SG crankshaft
* Comes standard in the #20501 Monster GT SE
* Direct replacement
* Dual Start System. Pull start or drill start
* Large, finned cylinder head
* Slide valve carburetor
* Dual stage, high volume air cleaner
* Engine Replacement Policy
* Will not fit GT2 or NTC3
Price: $249.00 |
Details
|
Big Block K5.9 Engine: SAVXL,SAVX by Hobby Products International(HPI15250)
Specs;
Displacement: 5.9cc
Cylinder Type: ABC
Starting System: pull start
# of Ports: 3
Carb Type: 9.5mm composite slide carb
Price: $249.99 |
Details
|
DA 50CC Nitro Engine (FM01-10D)
50cc SPECIFICATIONS:
Performance...
Output Power: 5.2HP at 7500rpm
Idle Speed: 1350 rpm
Maximum Speed: 9000rpm
Static Thrust: 30lbs at 100
meters altitude
25lbs at 1800 meters
Dimensions...
Displacement: 50.8cc
Bore and Stroke: 43mm×35mm
Compression Ratio: 7.5:1
Weight: Engine - 1350g
Exhaust - 100g Ignition - 120g
Requirements...
Fuel: 2C Regular Gas mixed 30:1 - 45:1
(petroleum based for break in,
synthetic thereafter)
Propeller: 22×8; 22×10; 23×8
Ignition Battery: 4.8 to 6.0 Volts >=1200Mah
Replacement Spark plug: NGK CM6 or equivalent
Gap: 0.018" to 0.020"
Installation torque: 7 to 8 ft-lbs.
Configuration...
2Cycle air cooled
Walbro membrane pump carburetor with manual choke
Automatic advancing electronic ignition
Price: $339.00 |
Details
|
Evolution .52NX Heli Glow Engine without Muffler by Evolution Engines(EVOE0520H)
Specs:
Type: 2 - Stroke Helicopter Engine
Displacement: .52 cu in (8.52 cc)
Bore: 22.38 mm (.88")
Stroke: 21.53 mm (.85")
Cylinders: Single
Engine (Only) Weight: 15.36 oz (435.4 gramsJ)
Crankshaft Threads: 1/4 x 28 UNF
RPM Range: 2,000 - 16,000
Fuel: 15 - 30% Nitro Heli fuel
Mounting Dimensions: 4.16 x 1.85 x 3.68 in
Cylinder Type: Ringed
Carb Type: Barrel with two needles
Crank Type: Dual Ball Bearing
Price: $159.99 |
Details
|
FA-125A AAC with Muffler: AG by Saito Engines (SAIE125A)
Specs:
Type: 4-Stroke
Displacement: 1.25 cu in (20.52cc)
Bore: 1.24 in (31.7mm)
Stroke: 1.02 in (26.0mm)
Cylinders: Single AAC
Total Weight: 24.69 oz (700 g)
Engine (Only) Weight: 21.87 oz (620 g)
Muffler Weight: 2.89 oz (80 g)
Crankshaft Threads: M8 x 1.25mm
Benchmark Prop: APC 16X6 @ 9,000 rpm
Prop Range: 15x7 - 17x6
RPM Range: 1,800 - 10,000 rpm
Fuel: 10% - 30% nitro Synthetic mix
Mounting Dimensions: 119 x 60 x 127mm
Muffler Type: Cast
Cylinder Type: AAC
Carb Type: 2 Needle
Crank Type: Dual Ball Bearing
Needed to Complete
Propeller: 16x6
Price: $339.99 |
Details
|
G26 Heli Engine w/WT-643 carburetor by Zenoah(ZENE26H)
Specs:
Type: 2-stroke
Displacement: 1.55 cu in (25.40 cc)
Bore: 1.41 in (34.0 mm)
Stroke: 1.10 in (28.0 mm)
Cylinders: Single - chrome plated
Engine (Only) Weight: 56 oz
Crankshaft Threads: M8 x 1.25mm
RPM Range: 3,000 - 13,000
Fuel: Gas/Oil mix
Mounting Dimensions: 142 x 208 x 181 mm
Cylinder Type: Ring
Carb Type: Walbro WT-643
Crank Type: Ball Bearing
Price: $359.99 |
Details
|
IMZ RV-50S Heli Engine w/Muffle by JR(JRP953001)
Detailed Information:
For the heli modeler in the market for the best .50-size heli engine money can buy, the search is over. JR's IMZ RV-50S has everything a power-hungry pilot could want, including a KSJ tuned muffler. Featuring a side-mounted slide valve carburetor with Reed Valve induction, the new IMZ RV50-S is one of the smoothest running engines out there and extremely reliable in any flight .....
Price: $479.99 |
Details
|
